Choose between two ZEVcentric Eibach spring calibrations for the 2024+ dual-motor Tesla Model 3 Performance. Both packages lower the car and retain a linear-rate front spring with a progressive-rate rear spring, but each is tuned for a different priority.
Comfort specification
Best for daily driving, winding roads, grip, and ride comfort.
- Approximate drop: 0.6 inch front and 1.0 inch rear
- Front spring: linear rate, approximately 30% softer
- Rear spring: progressive rate, approximately 50% to 15% softer through its range
- Expected settled hub-to-fender measurement on factory dampers: approximately 360 mm front and rear, plus or minus 5 mm
Performance specification
Best for reduced body roll, autocross, and track-focused use.
- Approximate drop: 1.2 inches front and 1.5 inches rear
- Front spring: linear rate, approximately 10% stiffer
- Rear spring: progressive rate, approximately 40% softer to 10% stiffer through its range
- Expected settled hub-to-fender measurement on factory dampers: approximately 345 mm front and rear, plus or minus 5 mm
Reference measurements
- Factory: approximately 380 mm front and 390 mm rear
- Comfort: approximately 360 mm front and rear, plus or minus 5 mm
- Performance: approximately 345 mm front and rear, plus or minus 5 mm
Measurements are based on ZEVcentric’s 2024 Model 3 Performance using factory dampers, rear camber arms, and ZEVcentric’s recommended alignment settings. Chassis-to-chassis variation is expected.
Fitment and options
2024+ dual-motor Tesla Model 3 Performance. Select Comfort or Performance and the available camber-arm option above. If camber arms are selected, leave an order note requesting Blue or Black.
Installation and alignment
Professional installation, adjustable rear camber arms, and a complete post-installation alignment are recommended to achieve the referenced stance and alignment targets.
ZEVcentric test and comparison videos
Eibach million-mile warranty applies.