Replace one front TEIN EnduraPro PLUS adjustable damper on a compatible Tesla Model 3 or Model Y. This listing is for a single front-left or front-right replacement shock; select the exact drivetrain and side above.
ZEVcentric recommends replacing left and right front dampers together to keep damping forces consistent. The product has been updated, so both sides must be replaced when matching against an older version. Scan the QR code on the damper body to verify its production date.
Damping adjustment
EnduraPro PLUS provides 16 usable damping positions that adjust compression and rebound together. Do not adjust past position 16 even if the dial physically produces 28–32 clicks; exceeding the stated range voids the warranty.
Fitment and ordering
- Tesla Model 3 / Model Y AWD: choose Front Left or Front Right AWD
- Tesla Model 3 / Model Y RWD: choose Front Left or Front Right RWD
- Each selection includes one replacement front damper only
- Subject to availability
Design
- OE-shape damper for use with the original spring and upper mount
- Twin-tube construction for long stroke and controlled low-speed ride quality
- Larger shell diameter increases oil capacity
- High-strength shell material with approximately 150% of the tensile strength of the OE shell case
- TEIN green, solvent-free, two-layer/one-bake powder coating for corrosion resistance
Professional installation and a complete alignment check are recommended after damper replacement.