Replace one rear TEIN EnduraPro PLUS adjustable damper on a compatible Tesla Model 3 or Model Y. This listing is for a single replacement rear shock intended for a damaged or failed matching TEIN unit.
ZEVcentric recommends replacing left and right rear dampers together to keep damping forces consistent. The product has been updated, so both sides must be replaced when matching against an older version. Scan the QR code on the damper body to verify its production date.
Damping adjustment
EnduraPro PLUS provides 16 usable damping positions that adjust compression and rebound together. Do not adjust past position 16 even if the dial physically produces 28–32 clicks; exceeding the stated range voids the warranty.
Important pairing requirement
Do not pair TEIN rear dampers with different front dampers, including original-equipment front shocks. Mixing damper systems can create an imbalance in handling and stability.
Design
- OE-shape damper for use with the original spring and upper mount
- Twin-tube construction for long stroke and controlled low-speed ride quality
- Larger shell diameter increases oil capacity
- High-strength shell material with approximately 150% of the tensile strength of the OE shell case
- TEIN green, solvent-free, two-layer/one-bake powder coating for corrosion resistance
Installation notes
Professional installation and a complete alignment check are recommended after damper replacement. Confirm that the opposite rear damper and both front dampers match the intended TEIN system before driving.