Model 3 Coilover Install

By ZEVCENTRIC USADecember 15, 2022

Please check out our YouTube video detailing how to install MPP or KW coilovers on a Model 3 along with an adjustable rear camber arm. Below we have included the tools and torque specs you will need to complete the job in record time!!!!!!

TOOLS:

Torque Wrench: 15 to 150 ft-lbs of range ideally.

Ratchets: 3/8" and/or 1/2"

1/4" Ratchet with 8mm socket

Pass Through Ratchet with 17mm socket

Sockets: 10mm, 13mm, 15mm, 17mm, 18mm, 19mm, 21mm, T50

Wrench: 21mm

Clip removal tool or flathead screwdriver

Part	Tools	Torque
Undertray	10mm, 15mm	3.7 ft/lbs
Speed Sensor	10mm	3.7 ft/lbs
Axle Nut	32mm	221.2 ft/lbs
Hub Retaining bolts	15mm	62.7 ft/lbs
Wheel Lugs	21mm	129.0 ft/lbs

Front
Lower Control Arm to Chassis w/loctite	21mm Socket & Wrench	84.8 ft/lbs
Lower Control Arm Ball Joints	T45/22mm Wrench	132.7 ft/lbs
Lower Control Arm to Shock	21mm Socket & Wrench	78.2 ft/lbs
Compression Arm to Chassis	21mm Socket & Wrench	84.8 ft/lbs
Compression Arm Ball Joints	T45/22mm Wrench	132.7 ft/lbs
Swaybar Endlink Balljoints	T40/18mm Wrench	72.3 ft/lbs
Swaybar Mount to Chassis	15mm Socket	25.8 ft/lbs
FUCA Balljoints	T50/15mm Socket	41.3 ft/lbs
FUCA to Carriage	13mm Socket or Wrench	36.9 ft/lbs
MPP FUCA Shim	3/8 12-Point Socket	20.0 ft/lbs
Coilover Upper Mount to Carriage	13mm Thin Wall Socket	15.0 ft/lbs
Coilover to Uppermount	17mm Passthrough Socket	15.0 ft/lbs
Carriage to Chassis 13mm	13mm Socket	25.8 ft/lbs
Carriage to Chassis 15mm	15mm Socket	45.7 ft/lbs
Brake line Bracket	10mm Socket	3.7 ft/lbs
Brake Caliper to Knuckle	E18 Socket	69.3 ft/lbs

Rear
Damper to Uppermount	17mm Passthrough Socket	15.0 ft/lbs
Uppermount to Chassis	15mm Socket	30.2 ft/lbs
Spring Arm to Subframe	21mm Socket & Wrench	84.8 ft/lbs
Spring Arm to Knuckle	21mm Socket & Wrench	84.8 ft/lbs
Spring Arm to Damper	21mm Socket & Wrench	84.8 ft/lbs
Camber Arm to Subframe	21mm Socket & Wrench	98.8 ft/lbs
Camber Arm to Knuckle	21mm Socket & Wrench	98.8 ft/lbs
MPP Camber Arm Pinch	10mm Socket & Wrench	8.7 ft/lbs
Toe Arm to Subframe	18mm Socket & Wrench	63.0 ft/lbs
Toe Arm to Knuckle	18mm Socket & Wrench	56.0 ft/lbs
MPP Toe Arm Pinch	10mm Socket & Wrench	8.7 ft/lbs
Trailing Arm to Subframe	18mm Socket & Wrench	56.0 ft/lbs
Trailing Arm to Knuckle	18mm Socket & Wrench	56.0 ft/lbs
Traction Arm to Subframe	18mm Socket & Wrench	56.0 ft/lbs
Traction Arm to Knuckle	18mm Socket & Wrench	56.0 ft/lbs
Spring Arm Aero Cover	10mm Socket	4.4 ft/lbs
Brake Caliper to Knuckle	E18	61.2 ft/lbs
Swaybar Endlinks	15mm, 5mm hex	40.6 ft/lbs
Swaybar Mount	11mm Socket	22.1 ft/lbs

Newer Post →

Cart0 items